================================================================
SEGAL FABRICATION  //  FLUX — WATER JETS
================================================================

Status:        SHIPPING
Headline:      200mm — Maximum material thickness

Flux is an abrasive waterjet that cuts cold: a 60,000 psi stream entrains garnet to erode through almost any material — hardened titanium, tempered glass, stone, stacked composite — with no heat-affected zone and no thermal distortion. Dynamic taper compensation tilts the head to deliver a square, finished edge straight off the table, so most parts need no secondary machining. One process, virtually any material, full thickness.

MODELS
----------------------------------------------------------------
  Flux 1.5         1.5 × 3 m table              from $110,000
  Flux 2.0         2 × 4 m table                from $165,000

SPECIFICATIONS
----------------------------------------------------------------

[ Cut Envelope ]
  Table size                         1.5 × 3 m or 2 × 4 m
  Max thickness                      200 mm
  Z travel                           300 mm

[ Pump & Head ]
  Pressure                           60,000 – 90,000 psi
  Pump                               30 / 60 / 90 hp intensifier
  Head                               Fixed or 5-axis taper-comp

[ Accuracy ]
  Positioning                        ±0.05 mm
  Edge taper                         Compensated to ±0.05 mm
  Heat-affected zone                 None

[ Controls & Software ]
  Nesting                            Segal Nest, kerf + lead-in opt.
  Control                            Adaptive feed by thickness

[ Power & Footprint ]
  Supply                             400 V 3Ø, to 75 kVA (90 hp)
  Footprint                          13 m² incl. pump + catch tank

[ Safety ]
  Containment                        Catch tank, abrasive removal
  Standards                          CE, HP-line guarding

MATERIALS
----------------------------------------------------------------
  Titanium, Steel & stainless, Aluminium, Glass, Stone & composite, Ceramic, Rubber & foam, Stacked / laminated stock

PROCESS NOTES
----------------------------------------------------------------
  • Cold cutting — zero heat-affected zone, no thermal distortion or temper loss.
  • Cuts virtually any material, conductive or not, to full thickness.
  • Dynamic taper compensation delivers a square, finished edge off the table.
  • Garnet recycling cuts abrasive cost on high-volume work.

================================================================
Generated by segalfabrication.com  ·  Configure & reserve at /machines/flux
================================================================